Servo Feed Retrofits
AIM’s servo feed retrofit system, which is independent of the mechanical Reeves drive, clutch and segment, provides the ultimate feed control. The motion profile of the feed ratios with the mechanical cam shaft using encoder feedback. An operator interface is used for inputting feed values based on degrees of camshaft rotation.
Programmable servo feed axis for single, multiple and bi-directional feeds
Programmable stop on sensor for length and angular control Minimum backlash for high accuracy
Eliminates segment, clutch drive and change gears
Servo feed is electronically coupled to camshaft
Shutdown inputs for dereeler and external length gauge
Segment arm and one way feed clutch are eliminated
Reduced Setup Time
Feed change gears and mechanical adjustments are no longer required and feed can be programmed around set cam positions
Single, multiple and bi-directional feed
Continuous high torque available for all wire diameters and feed lengths
Higher Production Rates
The need to cycle the segment arm is eliminated. Programmable feed velocity and accelerations yield higher production rates.
Standard Models Available: Torin W100, Torin W10A, Torin W11A, Torin W115, Torin W12A, Torin W125’s, Torin W13A
Other retrofit packages are also available
For questions or to request a quote, click here.
Call Now 1-800-933-0404